Product Description

Application and general description The GC-110 Temperature Transmitter amplifies and linearizes the resistance change in a Pt100 and Pt1000 temperature-sensing element. The transmitters are used for temperature measurements in the –200 to +600 °C range. The GC-110 Temperature Transmitter is designed according to the 2-wires principle, i.e. the power supply and the output signal are transmitted via the same two wires. This makes mounting easy and economical. Power/output wires are transient protected according to IEC 60. The temperature transmitter is housed in a terminal block, so it can be easily mounted directly on TS-32 and TS-35 mounting rails. End stoppers for groups of transmitters must be installed at both ends of the group. The temperature is measured by means of a Pt100 or Pt1000 sensing element and converted to an output signal, which varies linearly with the temperature. The temperature transmitters are pre-adjusted, and the standard ranges are stated in the ordering type code. The GC-110 Temperature Transmitter is designed for 4-wire connection to the temperature sensor, and the effect of cable resistance is negligible. If the distance between the sensor and the transmitter is 100 m with 4-wire 0.5 mm2 cable, the error will be approximately 0.1 % of full range. Notice: The title picture is just for reference. If you want to check the picture of real item, please contact me. OFFICE ADREES :B.M.C OPP,SHIVA BLESSING -2 OFFICE NO :225-B KALANALA BHAVNAGAR -364001 +91 98 2525 5648 info@tabassummarine.com